Solution Description
Product Description
High definition
411
FAQ
-
one. How lengthy have you been in this organization?
We have 17 years of business expertise. Mine truck components only!
-
2.Do you have enough goods?
ten thousand kinds of versions. One particular End Purchasing of mining Truck Parts.
-
three.Can you be reliable?
Our extended-phrase excellent cooperation with a hundred+ clients all around the entire world is the best proof.
-
four.Can there be an account interval?
O/A 90 Days
-
five.Are you a manufacturing unit or a investing company?
investing firm. we have 2000+Manufacturing unit best source chain. Strictly verify high quality and manage chance for you.
-
six.How extended will the delivery?
Inside a 7 days.
-
seven.Is there a low cost for new clients?
New consumers get up to 10% off their 1st get.
|
US $80-150 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | on-Line Service |
|---|---|
| Condition: | New |
| Axle Number: | 3 |
| Application: | Truck |
| Certification: | DIN, ISO |
| Material: | Steel |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| serial number | part number | name of parts | quantity |
| 1 | Q150B0825 | Hex bolt | 16 |
| 2 | Q40308 | Spring washer | 16 |
| 3 | DZ90149416017 | Front end cap | 2 |
| 4 | DZ90149416020 | Locking nut | 2 |
| 5 | Q218B1265TF2 | Inner hex bolt | 2 |
| 6 | DZ90149416019 | Stop washer | 2 |
| 7 | 33218JR | Tapered roller bearing | 2 |
| 8 | DZ9112342055 | Composite wheel nut | 24 |
| 9 | DZ90149416023 | Wheel hub | 2 |
| 10 | DZ9112342072 | Wheel fixture bolt | 24 |
| 11 | DZ9112342062 | Circlip for axle | 2 |
| 12 | 33221JR | Tapered roller bearing | 2 |
| 13 | DZ90149416021 | Caulking ring | 2 |
| 14 | DZ90149416024 | Seal ring for axle | 2 |
| 15 | Q5211630 | Columned dowel | 2 |
| 16 | DZ90149416018 | Gudgeon | 2 |
| 17 | DZ90149416025 | Steering knuckle | 1 |
| 18 | Q5211230 | Columned dowel | 8 |
| 19 | DZ90149416002 | Steering knuckle pin | 2 |
| 20 | DZ90149416039 | Adjusting washer | as needed |
| 21 | DZ90149416046 | Adjusting washer | as needed |
| 22 | DZ90149416047 | Adjusting washer | as needed |
| 23 | DZ90149416027 | O type ring | 2 |
| 24 | DZ90149416038 | Bush | 4 |
| 25 | DZ90149416037 | Axle box | 2 |
| 26 | DZ90149416028 | Steering knuckle arm assembly | 1 |
| 27 | DZ90149416034 | Steering promotive jar arm | 1 |
| 28 | 190003963114 | Taper thread grease nipple | 4 |
| 29 | DZ90001500001 | Hex dentiform bolt | 12 |
| 30 | Q151B24130TF2 | Hex bolt | 2 |
| 31 | DZ90149416026 | Steering knuckle | 1 |
| 32 | DZ90149416048 | Adjusting bolt | 2 |
| 33 | Q341B22T13F2 | 1 type hex nut | 2 |
| 34 | DZ90149416050 | Thrust tapered roller bearing | 2 |
| 35 | DZ90149416001 | Front axle assembly | 1 |
| 36 | DZ90149416058 | Front axle assembly | 1 |
| 37 | DZ90149416051 | Steering cross rod arm (L) | 1 |
| 38 | DZ90149416052 | Steering cross rod arm (R) | 1 |
| 39 | DZ9000150002 | Hex dentiform bolt | 14 |
| 40 | DZ90149436000 | Steering cross rod assembly | 1 |
| 41 | Q2541030 | Cruciate slot bolt | 6 |
| 42 | DZ90149446000 | Brake drum | 2 |
| 43 | DZ9112440526 | Uphold spring | 4 |
| 44 | DZ9112440525 | Return spring pin | 4 |
| 45 | DZ9112440524 | Return spring | 2 |
| 46 | DZ9112440527 | Roller axle | 4 |
| 47 | DZ90149446003 | Brake shoe | 4 |
| 48 | DZ90149446004 | Brake friction plate | 8 |
| 49 | DZ9112440529 | Clincher | 160 |
| 50 | DZ9112440532 | Pin axle | 2 |
| 51 | DZ9112440533 | Spring axle | 2 |
| 52 | DZ9112440531 | Lower return spring | 4 |
| 53 | DZ90001500003 | Inner hex bolt | 36 |
| 54 | DZ90149346025 | Brake floor | 2 |
| 55 | DZ90149446002 | Prevented dust cap | 2 |
| 56 | Q40310 | Spring washer | 12 |
| 57 | Q150B1016 | Hex bolt | 12 |
| 58 | DZ90149446010 | Brake camshaft (L) | 1 |
| 59 | DZ90149446011 | Brake camshaft (R) | 1 |
| 60 | DZ9112440508 | Washer | 8 |
| 61 | DZ9112440517 | O type packing ring | 6 |
| 62 | 190003963114 | Taper thread grease nipple | 2 |
| 63 | DZ9112440507 | Bush | 4 |
| 64 | Q43142 | Circlip for axle | 2 |
| 65 | DZ9112440521 | Packing hulkhead | 4 |
| 66 | Q43055 | Circlip for hole | 4 |
| 67 | Q151B1475TF2 | Hex bolt | 6 |
| 68 | Q700B01 | straight grease nipple | 2 |
| 69 | DZ90149446008 | Camshaft bearer (L) | 1 |
| 70 | DZ90149446009 | Camshaft bearer (R) | 1 |
| 71 | DZ9112440510 | Washer | as needed |
| 72 | DZ9112440511 | Washer | as needed |
| 73 | DZ9112440512 | Washer | as needed |
| 74 | DZ9112440513 | Washer | as needed |
| 75 | DZ9112440514 | Washer | as needed |
| 76 | DZ9112440515 | Washer | as needed |
| 77 | DZ90149446012 | Gap adjusting arm (L) | 1 |
| 78 | DZ90149446013 | Gap adjusting arm (R) | 1 |
| 79 | 188000340022 | Washer | 2 |
| 80 | 108000320028 | Adjusting washer | as needed |
| 81 | 108000320029 | Adjusting | as needed |
| 82 | 108000320030 | Adjusting | as needed |
| 83 | 108000320046 | Adjusting | as needed |
| 84 | 190003933116 | Circlip for axle | 2 |
| 85 | 190003903661 | Pin axle | 2 |
| 86 | DZ9114360317 | Diaphragm brake air-champer | 2 |
| 87 | 190003935015 | Flat washer-Q40114 | 2 |
| 88 | 190003920328 | Cotter pin-Q5004022 | 2 |
| 89 | DZ9003962021 | Plug | 1 |
| 90 | 06.02191.2611 | Hex bolt | 4 |
| 91 | Q1811235TF2 | Hex bolt | 14 |
| 92 | HD469-2502025 | Pass-axle box cap | 1 |
| 93 | 81.90685.0303 | Flange nut | 2 |
| 94 | HD469-2502029 | Passive column gear | 1 |
| 95 | 06.32499.0022 | Row-steep roller bearing | 2 |
| 96 | 06.32499.0088 | Row-steep roller bearing | 2 |
| 97 | 81.90770.0100 | Adjusting washer | as needed |
| 98 | HD469-2402100 | Row-steep roller bearing | 2 |
| 99 | HD469-2502164 | Active taper gear | 1 |
| 100 | HD469-2502165 | Active taper gear | 1 |
| 101 | HD469-2502162 | Active taper gear | 1 |
| 102 | HD469-2402012 | Roller bearing | 1 |
| 103 | HD469-2402055 | Stop ring | 1 |
| 104 | Q1811645TF2 | Hex bolt | 8 |
| 105 | HD469-2502030 | Bearing block | 1 |
| 106 | HD469-2402020 | Adjusting washer | as needed |
| 107 | Q5211228 | Pin | 2 |
| 108 | DZ90149326002 | Final drive case of cross | 1 |
| 109 | 81.35125.0024 | Adjusting nut | 2 |
| 110 | 06.32480.1800 | Row-steep roller bearing | 2 |
| 111 | 06.32489.0063 | Row-steep roller bearing | 2 |
| 112 | HD469-2403014 | Differential case (right) | 1 |
| 113 | HD469-2403011 | Differential case (right) | 1 |
| 114 | HD469-2403017 | Axle shaft gear washer | 2 |
| 115 | HD469-2403015 | Axle shaft gear | 1 |
| 116 | HD469-2403080 | Axle shaft gear | 1 |
| 117 | Q1800816 | Hex bolt | 2 |
| 118 | DZ9112320028 | Locking piece | 2 |
| 119 | DZ90149326002 | Final drive case of cross | 1 |
| 120 | Q151C20110TF2 | Hex bolt | 4 |
| 121 | HD469-2403018 | spherical surface Washer | 4 |
| 122 | HD469-2403016 | Plant gear | 4 |
| 123 | HD469-2403081 | Plant gear | 4 |
| 124 | Q5220816 | Pin | 4 |
| 125 | HD469-2403021 | Cross axle | 1 |
| 126 | HD469-2403019 | Cross axle | 2 |
| 127 | DZ90149326002 | Final drive case of cross | 1 |
| 128 | HD469-2502164 | Passive taper gear | 1 |
| 129 | HD469-2502165 | Passive taper gear | 1 |
| 130 | HD469-2502162 | Passive taper gear | 1 |
| 131 | HD469-2503012 | Differential case (left) | 1 |
| 132 | HD469-2503011 | Differential case (left) | 1 |
| 133 | DZ90149326001 | Hex bolt | 16 |
| 134 | HD469-2502012 | Flange | 1 |
| 135 | HD469-2502014 | Adjusting nut | 1 |
| 136 | DZ9112320920 | Axle seal ring | 1 |
| 137 | DZ95149326000 | Circle nut | 1 |
| 138 | DZ90149326012 | Bearing | 1 |
| 139 | 06.56279.0331 | Packing ring | 1 |
| 140 | 06.56279.0335 | Packing ring | 1 |
| 141 | 81.90685.0053 | Adjusting nut | 1 |
| 142 | DZ90149326000 | Axle of output | 1 |
| 143 | 06.32499.0005 | Row-steep roller bearing | 1 |
| 144 | HD469-2510016 | Axle shaft gear | 1 |
| 145 | HD469-2510015 | bush | 1 |
| 146 | HD469-2510017 | Adjusting shim | 1 |
| 147 | HD469-2510012 | Collect oil cover | 1 |
| 148 | HD469-2510014 | Cross axle | 1 |
| 149 | HD469-2510013 | Plant gear | 4 |
| 150 | HD469-2510011 | Differential case of axle | 1 |
| 151 | HD469-2502021 | Active column gear | 1 |
| 152 | HD469-2502019 | bush | 1 |
| 153 | HD469-2511012 | Sliding engage cowl | 1 |
| 154 | HD469-2502018 | Stop shim | 1 |
| 155 | HD469-2502011 | Perforation shaft(input) | 1 |
| 156 | HD469-2502015 | Locking piece | 1 |
| 157 | Q1800816TF2 | Hex bolt | 1 |
| 158 | Q218B0835 | bolt | 3 |
| 159 | 81.25503.0244 | Gearbox switch | 1 |
| 160 | 190003098020 | Packing ring | 1 |
| 161 | HD469-2406012 | Cylinder cover | 1 |
| 162 | HD469-2406017 | Gasket | 1 |
| 163 | HD469-2406014 | bush | 1 |
| 164 | HD469-2406013 | Plunger | 1 |
| 165 | HD469-2406015 | O-ring | 1 |
| 166 | HD469-2402014 | Washer | as needed |
| 167 | HD469-2402016 | Washer | as needed |
| 168 | HD469-2511011 | Selector fork | 1 |
| 169 | HD469-2406011 | Spring | 1 |
| 170 | 81.90685.0311 | Flange nut | 1 |
| 171 | 81.39115.0426 | Flange | 1 |
| 172 | 81.39135.2019 | Dirt guard | 1 |
| 173 | DZ9112320920 | Axle seal ring | 1 |
| 174 | DZ9112320275 | Grease packing seat | 1 |
| 175 | 06.32499.0022 | Row-steep roller bearing | 1 |
| 176 | 06.32499.0088 | Row-steep roller bearing | 1 |
| 177 | Q1811645TF2 | Hex bolt | 8 |
| 178 | HD469-2402018 | Bearing block | 1 |
| 179 | HD469-2402019 | O-ring | 1 |
| 180 | 81.90770.0100 | Adjusting washer | 1 |
| 181 | HD469-2402100 | Row-steep roller bearing | 1 |
| 182 | HD469-2402164 | Active taper gear | 1 |
| 183 | HD469-2402165 | Active taper gear | 1 |
| 184 | HD469-2402162 | Active taper gear | 1 |
| 185 | HD469-2402012 | Roller bearing | 1 |
| 186 | HD469-2402055 | Stop ring | 1 |
| 187 | HD469-2402020 | Adjusting washer | as needed |
| 188 | HD469-2402021 | Adjusting washer | as needed |
| 189 | HD469-2402022 | Adjusting washer | as needed |
| 190 | HD469-2402023 | Adjusting washer | as needed |
| 191 | HD469-2402024 | Adjusting washer | as needed |
| 192 | HD469-2402025 | Adjusting washer | as needed |
| 193 | DZ90149326005 | Rear axle main reducer housing | 1 |
| 194 | DZ9003962021 | Plug | 1 |
| 195 | 81.35125.0024 | Adjusting nut | 2 |
| 196 | 06.32480.1800 | Row-steep roller bearing | 2 |
| 197 | 06.32489.0063 | Row-steep roller bearing | 2 |
| 198 | DZ90149326001 | Hex bolt | 16 |
| 199 | HD469-2403025 | Differential case (left) | 1 |
| 200 | HD469-2403024 | Differential case (left) | 1 |
| 201 | HD469-2403017 | Axle shaft gear washer | 2 |
| 202 | HD469-2403015 | Axle shaft gear | 2 |
| 203 | HD469-2403080 | Axle shaft gear | 2 |
| 204 | Q1800816 | Hex bolt | 2 |
| 205 | DZ9112320028 | Locking piece | 2 |
| 206 | Q151C20110TF2 | bolt | 4 |
| 207 | DZ90149326005 | Rear axle main reducer housing | 1 |
| 208 | Q5220816 | Pin | 4 |
| 209 | HD469-2403018 | spherical surface Washer | 4 |
| 210 | HD469-2403016 | Plant gear | 4 |
| 211 | HD469-2403081 | Plant gear | 4 |
| 212 | HD469-2403019 | Cross axle | 2 |
| 213 | HD469-2403021 | Cross axle | 1 |
| 214 | DZ90149326005 | 1 | |
| 215 | HD469-2402164 | Active taper gear | 1 |
| 216 | HD469-2402165 | Active taper gear | 1 |
| 217 | HD469-2402162 | Active taper gear | 1 |
| 218 | HD469-2403014 | Differential case (right) | 1 |
| 219 | HD469-2403011 | Differential case (right) | 1 |
| 220 | DZ90149336002 | Middle axle housing assembly | 1 |
| 221 | 81.90801.0221 | Anti-loose piece | 1 |
| 222 | Q41408 | washer | 1 |
| 223 | Q150B0816TF2 | Hex bolt | 1 |
| 224 | 199000330006 | Vent assembly | 1 |
| 225 | Q5211228 | Pin | 2 |
| 226 | 81.90301.0025 | Plug | 1 |
| 227 | Q1211655TF2 | Stud | 10 |
| 228 | DZ9003100000 | Locking nut | 12 |
| 229 | DZ90149336003 | Rear axle housing assembly | 1 |
| 230 | 199000330006 | Vent assembly | 1 |
| 231 | DZ9003100000 | Locking nut | 12 |
| 232 | Q1211645TF2 | Stud | 6 |
| 233 | Q5211228 | Pin | 2 |
| 234 | Q12116455TF2 | Stud | 6 |
| 235 | 81.90301.0025 | Plug | 1 |
| 236 | DZ9112346116 | Plug | 4 |
| 237 | 190003098026 | Packing ring | 4 |
| 238 | Q184A1018TF2 | Hex bolt | 20 |
| 239 | DZ9112342013 | End cap | 2 |
| 240 | Q2541030 | Bolt | 12 |
| 241 | DZ90149346027 | Brake drum | 2 |
| 242 | DZ90149346008 | Hex bolt | 2 |
| 243 | DZ90149346005 | Hub redactor case | 2 |
| 244 | DZ9112342041 | Stopping washer | 20 |
| 245 | DZ9112342025 | Stopping washer | 4 |
| 246 | Q43155 | Circlip for shaft | 2 |
| 247 | DZ90149346045 | Stopping washer | 2 |
| 248 | DZ90149346013 | Central gear | 2 |
| 249 | DZ90149346012 | Planet gear | 10 |
| 250 | Q43365 | Wire circlip for shaft | 2 |
| 251 | DZ90149346011 | Planet gear axle | 10 |
| 252 | DZ90149346009 | Quill roller bearing assembly | 10 |
| 253 | 164 ´ 4DIN472 | Circlip for hole | 2 |
| 254 | DZ9112342030 | Adjuster washer | as needed |
| 255 | DZ9112342031 | Adjuster washer | as needed |
| 256 | DZ9112342032 | Adjuster washer | as needed |
| 257 | DZ9112342033 | Adjuster washer | as needed |
| 258 | DZ9112342034 | Adjuster washer | as needed |
| 259 | DZ90149346019 | Inside gear ring | 2 |
| 260 | DZ90149346018 | Gear ring bearer | 2 |
| 261 | DZ9112342091 | Circlip for hole | 2 |
| 262 | 32226 | Row-steep roller bearing | 2 |
| 263 | DZ9112342061 | O style packing ring | 4 |
| 264 | DZ9112342055 | Wheel nut | 24 |
| 265 | DZ90149346020 | Wheel hub | 2 |
| 266 | DZ9112342071 | Wheel bolt | 24 |
| 267 | DZ9112342062 | Circlip for shaft | 2 |
| 268 | 32224 | Row-steep roller bearing | 2 |
| 269 | DZ90149346023 | Hub Packing ring | 2 |
| 270 | DZ9112342052 | Oil baffle disc | 2 |
| 271 | DZ90149346026 | Space ring | 2 |
| 272 | DZ9112440508 | Washer | 2 |
| 273 | DZ9112440517 | O style packing ring | 2 |
| 274 | DZ90001500004 | Hex bolt | 36 |
| 275 | DZ90149346029 | Brake assembly | 2 |
| 276 | DZ90149346004 | Bolt | 2 |
| 277 | DZ90149346016 | Locking nut | 2 |
| 278 | DZ90149346015 | Stopping ring | 2 |
| 279 | DZ90149346014 | Locking nut | 2 |
| 280 | DZ90149346028 | Axle shaft | 2 |
| 281 | DZ90149346033 | Brake cam shaft(right | 1 |
| 282 | DZ90149346034 | Brake cam shaft(right) | 1 |
| 283 | DZ90149346035 | Brake cam shaft(right | 1 |
| 284 | DZ90149346036 | Brake cam shaft(right | 1 |
| 285 | Q43142 | Circlip for shaft | 2 |
| 286 | Q150B08205 | Hex bolt | 8 |
| 287 | Q40308 | Spring washer | 8 |
| 288 | DZ90149346063 | Outside bearer | 2 |
| 289 | DZ9112340093 | Packing ring | 4 |
| 290 | SXQ70006 | Grease nipple | 2 |
| 291 | DZ9112340095 | Ball bearing | 2 |
| 292 | DZ9014934606 | Inside bearer | 2 |
| 293 | Q151B1645TF2 | Hex bolt | 8 |
| 294 | DZ90149346037 | Chamber bearer (right) | 1 |
| 295 | DZ90149346038 | Chamber bearer (right) | 1 |
| 296 | DZ90149346039 | Chamber bearer (right) | 1 |
| 297 | DZ90149346040 | Chamber bearer (right) | 1 |
| 298 | DZ90149346040 | Chamber bearer (right) | 1 |
| 299 | DZ90149346042 | Adjuster washer Adjuster washer | as needed |
| 300 | DZ90149346043 | Adjuster washer Adjuster washer | as needed |
| 301 | DZ90149346044 | Adjuster washer | as needed |
| 302 | DZ90149346041 | Gap adjuster arm assembly | 2 |
| 303 | 188000340022 | Washer | 2 |
| 304 | 108000320028 | Adjuster washer Adjuster washer Adjuster washer | as needed |
| 305 | 108000320029 | Adjuster washer | as needed |
| 306 | 108000320030 | Adjuster washer | as neede |
| 307 | 108000320046 | Adjuster washer | as neede |
| 308 | 190003933116 | Circlip for axle | 2 |
| 309 | 190003920328 | Pin | 2 |
| 310 | 190003935015 | Washer | 2 |
| 311 | DZ9114360317 | Brake chamber | 2 |
| 312 | 190003903661 | Pin | 2 |
| 313 | DZ9112440521 | Choke plug | 2 |
| 314 | Q150B1016 | Hex bolt | 6 |
| 315 | Q40310 | Spring washer | 6 |
| 316 | DZ90149346030 | Dirt guard | 1 |
| 317 | DZ9112440523 | Bush | 1 |
| 318 | 190003963114 | Taper thread grease nipple | 1 |
| 319 | DZ9112440524 | Return spring | 1 |
| 320 | DZ9112440525 | Return spring pin | 2 |
| 321 | DZ9112440526 | Support spring | 2 |
| 322 | DZ9112440527 | Holddown wheel | 2 |
| 323 | DZ90149346031 | Brake shoe | 2 |
| 324 | DZ9112440529 | Clinch | 80 |
| 325 | DZ90149346032 | Brake camshaft | 4 |
| 326 | DZ9112440531 | Down return spring | 2 |
| 327 | DZ9112440532 | Pin axle | 1 |
| 328 | DZ9112440533 | Bullet axle | 1 |
| 329 | DZ90149346025 | Brake camshaft | 1 |
|
US $80-150 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | on-Line Service |
|---|---|
| Condition: | New |
| Axle Number: | 3 |
| Application: | Truck |
| Certification: | DIN, ISO |
| Material: | Steel |
###
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| serial number | part number | name of parts | quantity |
| 1 | Q150B0825 | Hex bolt | 16 |
| 2 | Q40308 | Spring washer | 16 |
| 3 | DZ90149416017 | Front end cap | 2 |
| 4 | DZ90149416020 | Locking nut | 2 |
| 5 | Q218B1265TF2 | Inner hex bolt | 2 |
| 6 | DZ90149416019 | Stop washer | 2 |
| 7 | 33218JR | Tapered roller bearing | 2 |
| 8 | DZ9112342055 | Composite wheel nut | 24 |
| 9 | DZ90149416023 | Wheel hub | 2 |
| 10 | DZ9112342072 | Wheel fixture bolt | 24 |
| 11 | DZ9112342062 | Circlip for axle | 2 |
| 12 | 33221JR | Tapered roller bearing | 2 |
| 13 | DZ90149416021 | Caulking ring | 2 |
| 14 | DZ90149416024 | Seal ring for axle | 2 |
| 15 | Q5211630 | Columned dowel | 2 |
| 16 | DZ90149416018 | Gudgeon | 2 |
| 17 | DZ90149416025 | Steering knuckle | 1 |
| 18 | Q5211230 | Columned dowel | 8 |
| 19 | DZ90149416002 | Steering knuckle pin | 2 |
| 20 | DZ90149416039 | Adjusting washer | as needed |
| 21 | DZ90149416046 | Adjusting washer | as needed |
| 22 | DZ90149416047 | Adjusting washer | as needed |
| 23 | DZ90149416027 | O type ring | 2 |
| 24 | DZ90149416038 | Bush | 4 |
| 25 | DZ90149416037 | Axle box | 2 |
| 26 | DZ90149416028 | Steering knuckle arm assembly | 1 |
| 27 | DZ90149416034 | Steering promotive jar arm | 1 |
| 28 | 190003963114 | Taper thread grease nipple | 4 |
| 29 | DZ90001500001 | Hex dentiform bolt | 12 |
| 30 | Q151B24130TF2 | Hex bolt | 2 |
| 31 | DZ90149416026 | Steering knuckle | 1 |
| 32 | DZ90149416048 | Adjusting bolt | 2 |
| 33 | Q341B22T13F2 | 1 type hex nut | 2 |
| 34 | DZ90149416050 | Thrust tapered roller bearing | 2 |
| 35 | DZ90149416001 | Front axle assembly | 1 |
| 36 | DZ90149416058 | Front axle assembly | 1 |
| 37 | DZ90149416051 | Steering cross rod arm (L) | 1 |
| 38 | DZ90149416052 | Steering cross rod arm (R) | 1 |
| 39 | DZ9000150002 | Hex dentiform bolt | 14 |
| 40 | DZ90149436000 | Steering cross rod assembly | 1 |
| 41 | Q2541030 | Cruciate slot bolt | 6 |
| 42 | DZ90149446000 | Brake drum | 2 |
| 43 | DZ9112440526 | Uphold spring | 4 |
| 44 | DZ9112440525 | Return spring pin | 4 |
| 45 | DZ9112440524 | Return spring | 2 |
| 46 | DZ9112440527 | Roller axle | 4 |
| 47 | DZ90149446003 | Brake shoe | 4 |
| 48 | DZ90149446004 | Brake friction plate | 8 |
| 49 | DZ9112440529 | Clincher | 160 |
| 50 | DZ9112440532 | Pin axle | 2 |
| 51 | DZ9112440533 | Spring axle | 2 |
| 52 | DZ9112440531 | Lower return spring | 4 |
| 53 | DZ90001500003 | Inner hex bolt | 36 |
| 54 | DZ90149346025 | Brake floor | 2 |
| 55 | DZ90149446002 | Prevented dust cap | 2 |
| 56 | Q40310 | Spring washer | 12 |
| 57 | Q150B1016 | Hex bolt | 12 |
| 58 | DZ90149446010 | Brake camshaft (L) | 1 |
| 59 | DZ90149446011 | Brake camshaft (R) | 1 |
| 60 | DZ9112440508 | Washer | 8 |
| 61 | DZ9112440517 | O type packing ring | 6 |
| 62 | 190003963114 | Taper thread grease nipple | 2 |
| 63 | DZ9112440507 | Bush | 4 |
| 64 | Q43142 | Circlip for axle | 2 |
| 65 | DZ9112440521 | Packing hulkhead | 4 |
| 66 | Q43055 | Circlip for hole | 4 |
| 67 | Q151B1475TF2 | Hex bolt | 6 |
| 68 | Q700B01 | straight grease nipple | 2 |
| 69 | DZ90149446008 | Camshaft bearer (L) | 1 |
| 70 | DZ90149446009 | Camshaft bearer (R) | 1 |
| 71 | DZ9112440510 | Washer | as needed |
| 72 | DZ9112440511 | Washer | as needed |
| 73 | DZ9112440512 | Washer | as needed |
| 74 | DZ9112440513 | Washer | as needed |
| 75 | DZ9112440514 | Washer | as needed |
| 76 | DZ9112440515 | Washer | as needed |
| 77 | DZ90149446012 | Gap adjusting arm (L) | 1 |
| 78 | DZ90149446013 | Gap adjusting arm (R) | 1 |
| 79 | 188000340022 | Washer | 2 |
| 80 | 108000320028 | Adjusting washer | as needed |
| 81 | 108000320029 | Adjusting | as needed |
| 82 | 108000320030 | Adjusting | as needed |
| 83 | 108000320046 | Adjusting | as needed |
| 84 | 190003933116 | Circlip for axle | 2 |
| 85 | 190003903661 | Pin axle | 2 |
| 86 | DZ9114360317 | Diaphragm brake air-champer | 2 |
| 87 | 190003935015 | Flat washer-Q40114 | 2 |
| 88 | 190003920328 | Cotter pin-Q5004022 | 2 |
| 89 | DZ9003962021 | Plug | 1 |
| 90 | 06.02191.2611 | Hex bolt | 4 |
| 91 | Q1811235TF2 | Hex bolt | 14 |
| 92 | HD469-2502025 | Pass-axle box cap | 1 |
| 93 | 81.90685.0303 | Flange nut | 2 |
| 94 | HD469-2502029 | Passive column gear | 1 |
| 95 | 06.32499.0022 | Row-steep roller bearing | 2 |
| 96 | 06.32499.0088 | Row-steep roller bearing | 2 |
| 97 | 81.90770.0100 | Adjusting washer | as needed |
| 98 | HD469-2402100 | Row-steep roller bearing | 2 |
| 99 | HD469-2502164 | Active taper gear | 1 |
| 100 | HD469-2502165 | Active taper gear | 1 |
| 101 | HD469-2502162 | Active taper gear | 1 |
| 102 | HD469-2402012 | Roller bearing | 1 |
| 103 | HD469-2402055 | Stop ring | 1 |
| 104 | Q1811645TF2 | Hex bolt | 8 |
| 105 | HD469-2502030 | Bearing block | 1 |
| 106 | HD469-2402020 | Adjusting washer | as needed |
| 107 | Q5211228 | Pin | 2 |
| 108 | DZ90149326002 | Final drive case of cross | 1 |
| 109 | 81.35125.0024 | Adjusting nut | 2 |
| 110 | 06.32480.1800 | Row-steep roller bearing | 2 |
| 111 | 06.32489.0063 | Row-steep roller bearing | 2 |
| 112 | HD469-2403014 | Differential case (right) | 1 |
| 113 | HD469-2403011 | Differential case (right) | 1 |
| 114 | HD469-2403017 | Axle shaft gear washer | 2 |
| 115 | HD469-2403015 | Axle shaft gear | 1 |
| 116 | HD469-2403080 | Axle shaft gear | 1 |
| 117 | Q1800816 | Hex bolt | 2 |
| 118 | DZ9112320028 | Locking piece | 2 |
| 119 | DZ90149326002 | Final drive case of cross | 1 |
| 120 | Q151C20110TF2 | Hex bolt | 4 |
| 121 | HD469-2403018 | spherical surface Washer | 4 |
| 122 | HD469-2403016 | Plant gear | 4 |
| 123 | HD469-2403081 | Plant gear | 4 |
| 124 | Q5220816 | Pin | 4 |
| 125 | HD469-2403021 | Cross axle | 1 |
| 126 | HD469-2403019 | Cross axle | 2 |
| 127 | DZ90149326002 | Final drive case of cross | 1 |
| 128 | HD469-2502164 | Passive taper gear | 1 |
| 129 | HD469-2502165 | Passive taper gear | 1 |
| 130 | HD469-2502162 | Passive taper gear | 1 |
| 131 | HD469-2503012 | Differential case (left) | 1 |
| 132 | HD469-2503011 | Differential case (left) | 1 |
| 133 | DZ90149326001 | Hex bolt | 16 |
| 134 | HD469-2502012 | Flange | 1 |
| 135 | HD469-2502014 | Adjusting nut | 1 |
| 136 | DZ9112320920 | Axle seal ring | 1 |
| 137 | DZ95149326000 | Circle nut | 1 |
| 138 | DZ90149326012 | Bearing | 1 |
| 139 | 06.56279.0331 | Packing ring | 1 |
| 140 | 06.56279.0335 | Packing ring | 1 |
| 141 | 81.90685.0053 | Adjusting nut | 1 |
| 142 | DZ90149326000 | Axle of output | 1 |
| 143 | 06.32499.0005 | Row-steep roller bearing | 1 |
| 144 | HD469-2510016 | Axle shaft gear | 1 |
| 145 | HD469-2510015 | bush | 1 |
| 146 | HD469-2510017 | Adjusting shim | 1 |
| 147 | HD469-2510012 | Collect oil cover | 1 |
| 148 | HD469-2510014 | Cross axle | 1 |
| 149 | HD469-2510013 | Plant gear | 4 |
| 150 | HD469-2510011 | Differential case of axle | 1 |
| 151 | HD469-2502021 | Active column gear | 1 |
| 152 | HD469-2502019 | bush | 1 |
| 153 | HD469-2511012 | Sliding engage cowl | 1 |
| 154 | HD469-2502018 | Stop shim | 1 |
| 155 | HD469-2502011 | Perforation shaft(input) | 1 |
| 156 | HD469-2502015 | Locking piece | 1 |
| 157 | Q1800816TF2 | Hex bolt | 1 |
| 158 | Q218B0835 | bolt | 3 |
| 159 | 81.25503.0244 | Gearbox switch | 1 |
| 160 | 190003098020 | Packing ring | 1 |
| 161 | HD469-2406012 | Cylinder cover | 1 |
| 162 | HD469-2406017 | Gasket | 1 |
| 163 | HD469-2406014 | bush | 1 |
| 164 | HD469-2406013 | Plunger | 1 |
| 165 | HD469-2406015 | O-ring | 1 |
| 166 | HD469-2402014 | Washer | as needed |
| 167 | HD469-2402016 | Washer | as needed |
| 168 | HD469-2511011 | Selector fork | 1 |
| 169 | HD469-2406011 | Spring | 1 |
| 170 | 81.90685.0311 | Flange nut | 1 |
| 171 | 81.39115.0426 | Flange | 1 |
| 172 | 81.39135.2019 | Dirt guard | 1 |
| 173 | DZ9112320920 | Axle seal ring | 1 |
| 174 | DZ9112320275 | Grease packing seat | 1 |
| 175 | 06.32499.0022 | Row-steep roller bearing | 1 |
| 176 | 06.32499.0088 | Row-steep roller bearing | 1 |
| 177 | Q1811645TF2 | Hex bolt | 8 |
| 178 | HD469-2402018 | Bearing block | 1 |
| 179 | HD469-2402019 | O-ring | 1 |
| 180 | 81.90770.0100 | Adjusting washer | 1 |
| 181 | HD469-2402100 | Row-steep roller bearing | 1 |
| 182 | HD469-2402164 | Active taper gear | 1 |
| 183 | HD469-2402165 | Active taper gear | 1 |
| 184 | HD469-2402162 | Active taper gear | 1 |
| 185 | HD469-2402012 | Roller bearing | 1 |
| 186 | HD469-2402055 | Stop ring | 1 |
| 187 | HD469-2402020 | Adjusting washer | as needed |
| 188 | HD469-2402021 | Adjusting washer | as needed |
| 189 | HD469-2402022 | Adjusting washer | as needed |
| 190 | HD469-2402023 | Adjusting washer | as needed |
| 191 | HD469-2402024 | Adjusting washer | as needed |
| 192 | HD469-2402025 | Adjusting washer | as needed |
| 193 | DZ90149326005 | Rear axle main reducer housing | 1 |
| 194 | DZ9003962021 | Plug | 1 |
| 195 | 81.35125.0024 | Adjusting nut | 2 |
| 196 | 06.32480.1800 | Row-steep roller bearing | 2 |
| 197 | 06.32489.0063 | Row-steep roller bearing | 2 |
| 198 | DZ90149326001 | Hex bolt | 16 |
| 199 | HD469-2403025 | Differential case (left) | 1 |
| 200 | HD469-2403024 | Differential case (left) | 1 |
| 201 | HD469-2403017 | Axle shaft gear washer | 2 |
| 202 | HD469-2403015 | Axle shaft gear | 2 |
| 203 | HD469-2403080 | Axle shaft gear | 2 |
| 204 | Q1800816 | Hex bolt | 2 |
| 205 | DZ9112320028 | Locking piece | 2 |
| 206 | Q151C20110TF2 | bolt | 4 |
| 207 | DZ90149326005 | Rear axle main reducer housing | 1 |
| 208 | Q5220816 | Pin | 4 |
| 209 | HD469-2403018 | spherical surface Washer | 4 |
| 210 | HD469-2403016 | Plant gear | 4 |
| 211 | HD469-2403081 | Plant gear | 4 |
| 212 | HD469-2403019 | Cross axle | 2 |
| 213 | HD469-2403021 | Cross axle | 1 |
| 214 | DZ90149326005 | 1 | |
| 215 | HD469-2402164 | Active taper gear | 1 |
| 216 | HD469-2402165 | Active taper gear | 1 |
| 217 | HD469-2402162 | Active taper gear | 1 |
| 218 | HD469-2403014 | Differential case (right) | 1 |
| 219 | HD469-2403011 | Differential case (right) | 1 |
| 220 | DZ90149336002 | Middle axle housing assembly | 1 |
| 221 | 81.90801.0221 | Anti-loose piece | 1 |
| 222 | Q41408 | washer | 1 |
| 223 | Q150B0816TF2 | Hex bolt | 1 |
| 224 | 199000330006 | Vent assembly | 1 |
| 225 | Q5211228 | Pin | 2 |
| 226 | 81.90301.0025 | Plug | 1 |
| 227 | Q1211655TF2 | Stud | 10 |
| 228 | DZ9003100000 | Locking nut | 12 |
| 229 | DZ90149336003 | Rear axle housing assembly | 1 |
| 230 | 199000330006 | Vent assembly | 1 |
| 231 | DZ9003100000 | Locking nut | 12 |
| 232 | Q1211645TF2 | Stud | 6 |
| 233 | Q5211228 | Pin | 2 |
| 234 | Q12116455TF2 | Stud | 6 |
| 235 | 81.90301.0025 | Plug | 1 |
| 236 | DZ9112346116 | Plug | 4 |
| 237 | 190003098026 | Packing ring | 4 |
| 238 | Q184A1018TF2 | Hex bolt | 20 |
| 239 | DZ9112342013 | End cap | 2 |
| 240 | Q2541030 | Bolt | 12 |
| 241 | DZ90149346027 | Brake drum | 2 |
| 242 | DZ90149346008 | Hex bolt | 2 |
| 243 | DZ90149346005 | Hub redactor case | 2 |
| 244 | DZ9112342041 | Stopping washer | 20 |
| 245 | DZ9112342025 | Stopping washer | 4 |
| 246 | Q43155 | Circlip for shaft | 2 |
| 247 | DZ90149346045 | Stopping washer | 2 |
| 248 | DZ90149346013 | Central gear | 2 |
| 249 | DZ90149346012 | Planet gear | 10 |
| 250 | Q43365 | Wire circlip for shaft | 2 |
| 251 | DZ90149346011 | Planet gear axle | 10 |
| 252 | DZ90149346009 | Quill roller bearing assembly | 10 |
| 253 | 164 ´ 4DIN472 | Circlip for hole | 2 |
| 254 | DZ9112342030 | Adjuster washer | as needed |
| 255 | DZ9112342031 | Adjuster washer | as needed |
| 256 | DZ9112342032 | Adjuster washer | as needed |
| 257 | DZ9112342033 | Adjuster washer | as needed |
| 258 | DZ9112342034 | Adjuster washer | as needed |
| 259 | DZ90149346019 | Inside gear ring | 2 |
| 260 | DZ90149346018 | Gear ring bearer | 2 |
| 261 | DZ9112342091 | Circlip for hole | 2 |
| 262 | 32226 | Row-steep roller bearing | 2 |
| 263 | DZ9112342061 | O style packing ring | 4 |
| 264 | DZ9112342055 | Wheel nut | 24 |
| 265 | DZ90149346020 | Wheel hub | 2 |
| 266 | DZ9112342071 | Wheel bolt | 24 |
| 267 | DZ9112342062 | Circlip for shaft | 2 |
| 268 | 32224 | Row-steep roller bearing | 2 |
| 269 | DZ90149346023 | Hub Packing ring | 2 |
| 270 | DZ9112342052 | Oil baffle disc | 2 |
| 271 | DZ90149346026 | Space ring | 2 |
| 272 | DZ9112440508 | Washer | 2 |
| 273 | DZ9112440517 | O style packing ring | 2 |
| 274 | DZ90001500004 | Hex bolt | 36 |
| 275 | DZ90149346029 | Brake assembly | 2 |
| 276 | DZ90149346004 | Bolt | 2 |
| 277 | DZ90149346016 | Locking nut | 2 |
| 278 | DZ90149346015 | Stopping ring | 2 |
| 279 | DZ90149346014 | Locking nut | 2 |
| 280 | DZ90149346028 | Axle shaft | 2 |
| 281 | DZ90149346033 | Brake cam shaft(right | 1 |
| 282 | DZ90149346034 | Brake cam shaft(right) | 1 |
| 283 | DZ90149346035 | Brake cam shaft(right | 1 |
| 284 | DZ90149346036 | Brake cam shaft(right | 1 |
| 285 | Q43142 | Circlip for shaft | 2 |
| 286 | Q150B08205 | Hex bolt | 8 |
| 287 | Q40308 | Spring washer | 8 |
| 288 | DZ90149346063 | Outside bearer | 2 |
| 289 | DZ9112340093 | Packing ring | 4 |
| 290 | SXQ70006 | Grease nipple | 2 |
| 291 | DZ9112340095 | Ball bearing | 2 |
| 292 | DZ9014934606 | Inside bearer | 2 |
| 293 | Q151B1645TF2 | Hex bolt | 8 |
| 294 | DZ90149346037 | Chamber bearer (right) | 1 |
| 295 | DZ90149346038 | Chamber bearer (right) | 1 |
| 296 | DZ90149346039 | Chamber bearer (right) | 1 |
| 297 | DZ90149346040 | Chamber bearer (right) | 1 |
| 298 | DZ90149346040 | Chamber bearer (right) | 1 |
| 299 | DZ90149346042 | Adjuster washer Adjuster washer | as needed |
| 300 | DZ90149346043 | Adjuster washer Adjuster washer | as needed |
| 301 | DZ90149346044 | Adjuster washer | as needed |
| 302 | DZ90149346041 | Gap adjuster arm assembly | 2 |
| 303 | 188000340022 | Washer | 2 |
| 304 | 108000320028 | Adjuster washer Adjuster washer Adjuster washer | as needed |
| 305 | 108000320029 | Adjuster washer | as needed |
| 306 | 108000320030 | Adjuster washer | as neede |
| 307 | 108000320046 | Adjuster washer | as neede |
| 308 | 190003933116 | Circlip for axle | 2 |
| 309 | 190003920328 | Pin | 2 |
| 310 | 190003935015 | Washer | 2 |
| 311 | DZ9114360317 | Brake chamber | 2 |
| 312 | 190003903661 | Pin | 2 |
| 313 | DZ9112440521 | Choke plug | 2 |
| 314 | Q150B1016 | Hex bolt | 6 |
| 315 | Q40310 | Spring washer | 6 |
| 316 | DZ90149346030 | Dirt guard | 1 |
| 317 | DZ9112440523 | Bush | 1 |
| 318 | 190003963114 | Taper thread grease nipple | 1 |
| 319 | DZ9112440524 | Return spring | 1 |
| 320 | DZ9112440525 | Return spring pin | 2 |
| 321 | DZ9112440526 | Support spring | 2 |
| 322 | DZ9112440527 | Holddown wheel | 2 |
| 323 | DZ90149346031 | Brake shoe | 2 |
| 324 | DZ9112440529 | Clinch | 80 |
| 325 | DZ90149346032 | Brake camshaft | 4 |
| 326 | DZ9112440531 | Down return spring | 2 |
| 327 | DZ9112440532 | Pin axle | 1 |
| 328 | DZ9112440533 | Bullet axle | 1 |
| 329 | DZ90149346025 | Brake camshaft | 1 |
Types of Bevel Gears
Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.
Spiral bevel gear
Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.
Straight bevel gear
Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.
Hypoid bevel gear
Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.
Addendum and dedendum angles
The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.
Applications of bevel gears
Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.
editor by czh 2022-12-19